Cizallas y Plegadoras en Almería, El Ejido y Níjar -

Shears and Folders

Precision cutting and bending of iron and steel.

Giving the shape, the precise angle and the required cuts in the manufacture of made-to measure pieces of iron and steel for finishing touches, steps and chassis for vehicles, is the job of the shears and folders of Hierros Agrobrico

Our collaboration in your projects guarantees that you will have profiles without deformation and with exact measurements, pieces without stress marks or cracks.

Click here to request information.

Ø Cord mm.	Cord Type	Endurance MPa	Endurance (kg/mm²)	Zinc Layer (g/m²)
5,00	1x2 +0	1471	150	150-200
5,40	1x2 +0	1471	150	200-250
6,00	1x2 +0	1471	150	200-250

Ø Cord mm.	Coil Length (m)	Coil Weight (Kg)	Presentation Ø interior	Presentation Ø exterior
5,00	1300	98	350	550
5,40	1000	90	300	500
6,00	850	93	300	500

Ø Cord mm.	Cord Type	Endurance MPa	Endurance (kg/mm²)	Zinc Layer (kg/mm²)
5,40	1x3+0	1471	150	200-250
6,40	1x3+0	1471	150	200-250
8,20	1x3+0	1471	150	200-250

Ø Cord mm.	Coil Length (m)	Coil Weight (Kg)	Presentation Ø interior	Presentation Ø exterior
5,40	1000	115	300	500
6,40	600	100	300	500
8,20	400	103	300	500

Triple Galvanized
Hard	Sweet	Braid

Diameter m/m	Tolerance Ø mm.	Endurance MPa	Endurance (kg/mm²)	Zinc Layer (g/m²)
1,60	0,05	758 - 883	80 - 90	215
1,80	0,05	758 - 883	80 - 90	215
2,00	0,05	758 - 883	80 - 90	220
2,20	0,05	758 - 883	80 - 90	230
2,40	0,05	758 - 883	80 - 90	240
2,50	0,05	758 - 883	80 - 90	250
2,70	0,05	758 - 883	80 - 90	250

Ø wire mm.	1Kg Length	Roll Weight	Presentation inner Ø mm.	Presentation Ø exterior mm.
1,60	63,35	25/50	350	550
1,80	50,06	25/50	520	750
2,00	40,55	25/50	520	750
2,20	33,51	25/50	520	750
2,40	28,16	25/50	520	750
2,50	26,28	25/50	520	750
2,70	22,24	25/50	520	750

Diameter m/m	Tolerance Ø mm.	Endurance MPs	Endurance (kg/mm²)	Zinc Monolayer (g/m²)
1,30	0,03	392 - 490	40 - 50	40 - 120
1,60	0,03	392 - 490	40 - 50	40 - 120
1,80	0,03	392 - 490	40 - 50	40 - 120
2,00	0,03	392 - 490	40 - 50	40 - 120
2,20	0,03	392 - 490	40 - 50	40 - 120
2,40	0,03	392 - 490	40 - 50	40 - 120
2,70	0,03	392 - 490	40 - 50	40 - 120
3,40	0,03	392 - 490	40 - 50	40 - 120
4,40	0,03	392 - 490	40 - 50	40 - 120
4,90	0,03	392 - 490	40 - 50	40 - 120

Ø wire mm.	Zinc Triple Layer (g/m²)	1Kg Length	Roll Weight	Presentation Ø interior mm.	Presentation Ø exterior mm.
1,30	180	95,97	25/50	350	550
1,60	200	63,35	25/50	520	750
1,80	215	50,06	25/50	520	750
2,00	220	40,55	25/50	520	750
2,20	230	33,51	25/50	520	750
2,40	240	28,16	25/50	520	750
2,70	250	22,24	25/50	520	750
3,40	260	14,03	25/50	520	750
4,40	280	8,37	25/50	520	750
4,90	280	6,75	25/50	520	750

Shears and Folders

Braid Twisted wires

Braid 1×2+0

Braid 1×3+0

Aluminized Special for greenhouse

Hard Galvanized Special for greenhouse

Sweet Galvanized Special for greenhouse

Splices For Control Bars

Window Frames Hot Dipped Galvanized

Control Bars Hot Dipped Galvanized

Strip Hot Dipped Galvanized

Flange Hot Dip Galvanized

Clamps Hot Dip Galvanized

Piñones H.D.G.

Racks H.D.G.

Cranks

Arms Double and Simple, hot dipped galvanized.

Plates

Gutter H.D.G.

SHEET

PLASTIC

RVLAM

POLYETHYLENE

Flat Greenhouse Center Iron Pipe H.D.G.

Center Scrape and feint Iron Pipe H.D.G.

Tubo de Centro H.D.G.

Corner Iron Pipes H.D.G.

Band Iron Pipes H.D.G.

Corridor Iron Pipes H.D.G.

Tubo de Centro H.D.G.

Trellised Iron Pipe H.D.G.

Feigned Iron Pipe H.D.G.

CORRUGATED Round

TRAPEZOIDAL SHEET 1045

CHAPA MINIONDA

PEGASO SHEET

TEARED RIBBED SHEET

STAMPED METAL SHEET

LAMINATED SHEET

THREADED

OVAL

RECTANGULAR Welded pipes

SQUARES Welded pipes

ROUND Welded pipes

RECTANGULAR Commercial Profiles